Did you upgrade your iPhone recently to firmware 3.1.2 ? And losing signal since then?
Now is the lucky day...
You can unlock 2G, 3G and 3Gs iPhone firmware 3.1.2 now with Blacksn0w..
How? :
1. Jailbreak your iPhone with Blackra1n ( see tutorial in other part of this blog)
2. Turn on cydia
3. Press manage
4. Sources
5.edit
6. Add
7. Type http://blackra1n.com
8. Add source
Back to cydia
Then you will see a new Repo written Blackra1n. Press it-install-confirm
REBOOT and insert SiM card..
that is it...done
Saturday, January 9, 2010
Can not see wi-fi after installing Blacksn0w
Problem with wi-fi after using blacksn0w?
Solution:
Reset network setting
Setting-general-reset-reset network setting
That will solve the problem....
Solution:
Reset network setting
Setting-general-reset-reset network setting
That will solve the problem....
What to check when buying second 2nd hand or used iPhone
Check these things
1. Body, check for dents or scratches
2. Screen sensitivity - Try the screen by opening applications or typing letters to know wether it is still sensitive...
3. Ask for 1 week warranty to check the battery life. Normally for used iPhone, the battery life is 12 hours when used and 24 hours less used or standby.
4. Check wi-fi. Go to setting-wifi. Look for wifi and test it. This is important as repairing wifi chip is expensive.
5. Check signal. Insert your own SIMcard to check if there is signal.
There are two kinds of iPhone: Factory unlocked (no carrier attached-free to use with any SIMcard) and Software unlock (with carrier attached-need to be unlocked if you wabt to use with any SIMcard), so make sure your iPhone is unlocked.
6. Check sound. Play one song or ringtone to check it.
7. Check headset jack. Insert the headset jack, it should appear headset on the screen.
Remove the jack- push the volume button up and down- it should appear ringer on the screen.
Please be sure of these:
Jack in : headset appear on the screen
Jack out: Ringer appear on the sreen
Because it can be other ways, means the jack is damaged
1. Body, check for dents or scratches
2. Screen sensitivity - Try the screen by opening applications or typing letters to know wether it is still sensitive...
3. Ask for 1 week warranty to check the battery life. Normally for used iPhone, the battery life is 12 hours when used and 24 hours less used or standby.
4. Check wi-fi. Go to setting-wifi. Look for wifi and test it. This is important as repairing wifi chip is expensive.
5. Check signal. Insert your own SIMcard to check if there is signal.
There are two kinds of iPhone: Factory unlocked (no carrier attached-free to use with any SIMcard) and Software unlock (with carrier attached-need to be unlocked if you wabt to use with any SIMcard), so make sure your iPhone is unlocked.
6. Check sound. Play one song or ringtone to check it.
7. Check headset jack. Insert the headset jack, it should appear headset on the screen.
Remove the jack- push the volume button up and down- it should appear ringer on the screen.
Please be sure of these:
Jack in : headset appear on the screen
Jack out: Ringer appear on the sreen
Because it can be other ways, means the jack is damaged
Best website to download free toshiba drivers
Try this one,it is complete and off course free of charge
http://gulf.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?LNG=13&service=AE
http://gulf.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?LNG=13&service=AE
How to restore Toshiba laptop to factory default
Try these, hope they will help you:
1. Copy all your files and documents to an external storage device.
2. Shut down the computer.
3. Turn the PC back on and hit the F8 key repeatedly until the Advanced Boot Option Screen appears.
4. Click "Repair Your Computer" if you are not already on it and then press ENTER
5. choose your country and click OK
6. On the "System Recovery Options Screen" click "Restore Application" which is the last option.
Or
Press C when you turn the laptop on,then let it go when the Thoshiba logo appear, then choose 'Restore to factory default'
1. Copy all your files and documents to an external storage device.
2. Shut down the computer.
3. Turn the PC back on and hit the F8 key repeatedly until the Advanced Boot Option Screen appears.
4. Click "Repair Your Computer" if you are not already on it and then press ENTER
5. choose your country and click OK
6. On the "System Recovery Options Screen" click "Restore Application" which is the last option.
Or
Press C when you turn the laptop on,then let it go when the Thoshiba logo appear, then choose 'Restore to factory default'
